AVAYA LUCENT BOGEN CALL STACKER for paging system Start Price USD 1,000.00 Current Price USD 1,000.00 Time Left - Bid Count 0 Buy It Now Price - Reserve Price - Start Time Sunday, November 16, 2008 End Time Sunday, November 23, 2008 Location CAPE COD MA See more about 'AVAYA LUCENT BOGEN CALL STACKER for paging system' Description 1 brand new (never powered) in box with manual 1 Avaya call stacker Introduction The Call Stacker is a microprocessor based audio recording and announcement system. The Call Stacker is used in conjunction with a paging system to provide buffered announcement play to the paging system. Figure 1-1. Call Stacker Unit The Call Stacker features 5 Input Station (recording) channels, a single Page Output channel and 3 minutes of recording time. Up to 5 announcements can be recorded simultaneously, virtually eliminating frustrating delays encountered when accessing the paging system. The recorded announcements are queued in order so the first announcement recorded that has hung up, plays first, followed by the second announcement, etc. The Call Stacker allows users to verify their announcements before they play to the paging system. If a user is not content with their recorded announcement, they can re-record it repeatedly until they are satisfied. The Call Stacker's Page Output channel interfaces to the paging system's control unit. Once an announcement is recorded, the Call Stacker plays the announcement over the Page Output channel to the paging system. While the recorded announcement is playing, the Page Output channel provides a contact closure to the paging system. Once the complete recorded announcement plays to the paging system, it is erased from the Call Stacker, freeing up the recording time for new announcements. The Call Stacker can be configured to record and play back paging zone selection signals. Between 2 and 4 DTMF digits can be entered prior to recording an announcement which, upon output, precede the recorded announcement and select the paging system's paging zone. The Call Stacker is equipped with battery backup which allows it to operate for up to two hours, from a fully charged battery, if a power failure occurs.   LULCST - Call Stacker MAT #408184018 Technical Specifications Specifications subject to change without notice. 9910 Recording Time: 3 minute base unit Input Lines: 5 analog station ports Output Lines: 1 page output channel Number of Stacked Announcements: 30 individual announcements Power Supply: 115V AC, 60 Hz. Dimensions and Weight: Height: 1.75" (4.4 cm) Width: 16.25" (41cm) without brackets, 19" (48.3 cm) with brackets attache Depth: 9.25 inches (23.5 cm) Weight 13 lb. (6 kg) Temperature Range: 0 to +40 deg. C. (32 to 104 deg. F.) operational –40 to +66 deg. C. (–40 to +150 deg. F.) storage and shipment Humidity Range: 5% to 95% (non-condensing) storage/shipment and operation Altitude: Sea level to 10,000 ft. operational (1048 to 648 millibars) 40,000 ft. max. shipment Environmental: Locate in an area free of excess moisture, corrosive gases, dust, and chemicals Battery Backup: Allows up to two hours of operation during a power failure. Total charge time 48 hours Frequency Response: 200 Hz to 3.4 kHz ( ±3 dB) Output Level: –9 dBm Control Contact Rating: 0.3 A / 60V DC 1.0 A / 24V DC 0.5 A / 120V AC   RETAIL VALUE $3995 Place a Bid!